system?.Įffects to the sound?.ĥ.5 How do I use an outboard effects processor?.ĥ.6 How do I set up live stage monitoring?. Callouts.Ģ.1 Channel Strip and Monitoring.Ģ.2 Input Channel Banks.Ģ.3 Display.Ģ.4 Group/Bus Banks.Ģ.5 Scenes, Assign, Mute Groups.Ģ.6 Rear Panel Connections.ģ. 6.1 Configuring the X-USB card for use in the console.5.16 Recording a 2-track directly with the console.5.14 Using the X32 COMPACT in recording and production studio environments.5.13 How do I set up a Matrix for a delay column/tower or a remote zone mix?.5.12 What kinds of Utilities are available?.5.11 How do I share signals over AES50 Supermac network?.5.9 Mix Buses, Sub Groups and DCA Groups.5.7 Everything you ought to know about Solo and monitor sources.5.6 How do I set up live stage monitoring?.5.5 How do I use an outboard effects processor?.5.4 How do I add one of the 8 internal effects to the sound?.5.3 How do I connect a microphone, process its signal and send it out to the P.A.5.2 Default setup for connecting to monitoring and P.A.

5.1 Starting up, shutting down, and firmware updates.You would use 'input' on the subwoofer to feed from the outputs of the mixing desk, then use 'high pass out' on the subwoofer to connect your Alto's. There are plenty of examples of alternative subwoofers which will do this, let me provide one here: However the cost of this type of equipment may be more expensive than actually buying a subwoofer with proffessional line level inputs/outputs, which actually does that without additional equipment. Using this example you can use input-1 and output-1 to do exactly what you need. This can be done with some equipment, and here is an example: 'convert those from 'balanced / professional line level' to 'unbalanced / consumer line level'Īs a picture is a thousands words, something like this:Īs you can see, I have drawn two 'box's' in the picture, which will have to do the conversion.Take the mix-output from both Alto TS210's, to feed the subwoofer.The subwoofer has unbalanced inputs, which seems to be at 'Consumer Line-Level.

The mixer has no further outputs to connect the subwoofer.

There are two problems we need to overcome: However as nobody else has commented, I will give you an answer on how you can do this. At first I was reluctant to answer this question, as I believe in order to do this properly, will cost more than the value of said sub-woofer.

Behringer x32 setup diagram